Skip to product information
1 of 5

DTF Station Hot Melt Powder

DTF Station Hot Melt Powder

Formulated for use during DTF Transfer, DTF Station adhesive powder is a crucial part of any DTF printing pipeline. Cover your DTF Transfer media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!

After baking the powder, solid white for more vibrant colors
Even and regular particles for quality graphics and good adherence
Finely coated film means no pinholes!
1 lb
1 kg
20 kg
Instructions (for use with DTF Station Warm Peel film):
Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
Transfer the image by heat press at 330°F for 15sec with medium pressure.
After the first press,
Option 1: Wait for 4-6 seconds and remove the film gently
Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.


Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.
View full details